Country/region and language selection
Slat cleaner

TruTool TSC 100

TruTool TSC 100

The machine adapts automatically to different slag thicknesses.

Your specialist for clean slats

With the TruTool TSC 100, you can clean your slats quickly and effortlessly. This ensures reliable, high-quality production of laser-cut components. The slats do not need to be removed for cleaning. This is practical and saves you time. It takes approximately 30 minutes to clean an entire standard size pallet of 60 x 120 in.

Cost reduction up to 75%

With the TruTool TSC 100, you can clean slats multiple times before they need to be replaced.

Simultaneous cleaning and production

On laser cutting machines with pallet changers, you can clean the slats during the cutting process.

Outstanding results

TruTool TSC 100 removes the slag thoroughly, even on slats that are subject to high loads.

1-man operation

The long machine handle enables you to clean the slats effortlessly by yourself.

How the cleaning works
TruTool TSC 100, dimensional drawing

Cleaning tool

Selecting the right tool means minimal effort during cleaning, helping you to achieve optimal cleaning results


The TruTool TSC 100 can be used on virtually all CO2 and SSL 2D laser cutting machines

The following consumables and the corresponding accessories are included in the scope of delivery.

Seal with functional monitoring feature (1x integrated, 1x included in delivery)
1 unit 2046587
Cleaning tool no. 3 incl. seal (integrated)
0.12 – 0.15 in Set of 2 1644867
Spacer plate (integrated)
1 unit 1734714
Allen wrench 6 mm
1 unit 1640682
Allen wrench 4 mm
1 unit 0369003
Slide plate
1 unit 1619017
Transport device
1 unit 1634956

Find the right consumables and accessories for your machine here.


1 piece  1633583

4 x sliding disk and 2 x seal

Set of 1  1681498
Cleaning tool no. 3

For strip thickness 0.12 - 0.15 in. incl. seal

Set of 2  1644867
Cleaning tool no. 2

For strip thickness 0.08 - 0.9 in. incl. seal

Set of 2  1644868
Seal with functional monitoring feature

1 unit  2046587
Spacer plate

If the height difference between the cross slat and slat is less than 2.4 in.

1 unit  1734714
Transport device

1 unit  1634956

Cost reduction up to 75%

The TruTool TSC 100 is a worthwhile purchase. It achieves savings of around 40% compared to manual cleaning, which involves a lot of effort and time. With the ability to clean slats multiple times, it is possible to save up to 75% of costs, compared with regular slat replacement.

Outstanding cleaning results

The TruTool TSC 100 adapts automatically to different slag thicknesses up to 1 inch and achieves optimal cleaning results, even in the case of stubborn stainless steel slag. The slats themselves are cleaned, as well as the spaces in between the teeth. A further benefit: You can insert the TruTool TSC 100 into any row of slats and clean these right up to the pallet edge while they are still installed.

Intelligent monitoring system

An intelligent monitoring system ensures safe and reliable work procedures. An integrated LED display uses a quick, continuous flash to notify you of when a seal needs to be replaced. As a result of the new seal function monitoring system, it is no longer necessary to perform a manual check at regular intervals, which was previously required. The maintenance interval is automatically controlled through an electronic display. This saves you time and prevents possible damage to the tool, which could occur if the seals are not checked and replaced at the specified maintenance intervals.

Cleaning tool

Choose between tool no. 2 for slat thicknesses of 2 mm – 2.9 mm and tool no. 3 for 3 mm – 3.9 mm. The tools boast a long service life. Before being replaced, they are capable of cleaning an average of 10 standard pallets, which corresponds to 3281 feet.

TruTool TSC 100
Slat cleaner  
Slat thickness 2 mm - 3.9 mm
Maximum slag thickness 25 mm
Minimum distance between slats 33.5 mm
Nominal power consumption 1700 W
Working speed (max.) 8 m/min
Length 2104 mm
Height 342 mm
Weight 18 kg

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Sectors, TRUMPF GmbH + Co. KG
Industry solutions

For numerous industries, TRUMPF has tailored solutions and specialists with precise knowledge of the specific requirements and applications.

TRUMPF Messestand
Events and dates for your calendar

Visit us at international trade shows and events and see our products first hand!

Image of the technology inside the TRUMPF slitting shears
Power tools

For cutting and connecting to edge forming – TRUMPF's power tools, produced in Switzerland, lend a helping hand on construction sites and in workshops.

Power Tools Sales
Fax +41 58 257 64 01
Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Service & contact