Ideal view for precise cutting
The cost-effective model without chip clipper is particularly well-suited to cutting tasks without chip clipping during the cutting process - for example, trimming straight sheets to length or cutting curves. A clear view of the workpiece enables you to cut accurately. The TruTool C 160 cuts sheet thicknesses of up to 0.06 inches in mild steel and 0.047 inches in stainless steel.
For applications where chip clipping is not necessary during the cutting process.
Well-suited to straight, distortion-free cuts and C-L-U profiles.
The machine's light weight and well-engineered ergonomics mean low fatigue levels during operation.
For perfect results, you can choose between four different cutters.
For cutting and trimming flat sheets. For radial and interior cutouts, as well as notches.
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
For cutting tubes.
For cutting checker plates. For radial and interior cutouts.
Corrugated sheet metal
For cutting corrugated sheet metal. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
0.039 - 0.063 in
1 unti 0927708
1 unit 0067822
1 unit 1763681
Find the right consumables and accessories for your machine here.
TruTool C 160
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||1.6 mm|
|Maximum sheet thickness, steel 600 N/mm²||1.2 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||2 mm|
|Smallest radius||40 mm|
|Working speed||6 m/min - 10 m/min|
|Stroke rate at nominal load||3800 1/min|
|Starting hole diameter||15 mm|
|Nominal input power||350 W|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.