The handy chip clipper option
The TruTool C 160 with integrated chip clipper for two-handed operation is ideal for notching and interior cutouts up to 0.06 inches in mild steel and 0.05 inches in stainless steel. It enables you to clip chips at any point. The machine can be easily removed from the workpiece and re-positioned accurately. A clear view of the workpiece makes your work easier and results in high-quality and distortion-free cuts.
The chips are clipped with a three-quarter clockwise turn by means of a lever.
You can cut chips at any time and pull the machine out of the workpiece.
The light weight of the machine and the well-engineered ergonomics mean low fatigue levels during operation.
For perfect results, you can choose between 4 different cutters.
For cutting and trimming flat sheets. For radial and interior cutouts as well as notches.
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
For cutting tubes.
For cutting corrugated material. For radial and interior cutouts.
For cutting corrugated sheet metal. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
0.039 - 0.063 in
Set of 2 0913520
1 unit 1884910
1 unit 0067822
1 unit 1763681
Find the right consumables and accessories for your machine here.
TruTool C 160 with chip clipper
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||1.6 mm|
|Maximum sheet thickness, steel 600 N/mm²||1.2 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||2 mm|
|Smallest radius||40 mm|
|Working speed||6 m/min - 10 m/min|
|Stroke rate at nominal load||3800 1/min|
|Starting hole diameter||15 mm|
|Nominal input power||350 W|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.