Battery machine for precise cuts
The 10.8 V battery machine, without chip clipper, is particularly well-suited to cutting tasks without chip clipping during the cutting process. For example if you are cutting straight sheets to length or for curved cutting. The 10.8 V battery provides an above-average runtime. The 2 Ah battery cuts around 70 meters in 400 N/mm2 mild steel at a sheet thickness of 0.31 inch. You can even double this service life with the 4 Ah battery.
Compact and practical 12V rechargeable battery. Compatible in its voltage class and with the 12V-36V recharger.
Practically unlimited service life, virtually wear-free and hardly any maintenance. Battery performance per charge is also increased.
A soft grip ensures a secure hold and enables low-vibration operation.
Well-suited for straight, distortion-free cuts and C-L-U profiles.
For cutting and trimming flat sheets. For radial and interior cutouts as well as notching.
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
For cutting tubes.
For cutting diamond plates. For radial and interior cutouts.
Corrugated sheet metal
For cutting corrugated sheet metal. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
0.039 - 0.063 in
Set of 2 0927708
1 unit 0067822
1 unti 2598770
1 unit, DE/CH version: 2569784
1 unit, GB version: 2569786
1 unit, USA version: 2569785
1 unti 2579850
1 unti 1763682
Find the right consumables and accessories for your machine here.
The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.
The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.
Small and handy
The 12V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.
Optimal working speed
You can use the speed control to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed of up to 29.5 feet per minute. The speed control is highly efficient for work with scribed lines or with a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
TruTool C 160 Li-ion battery 10.8 V
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||1.6 mm|
|Maximum sheet thickness, steel 600 N/mm²||1.2 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||2 mm|
|Spiral duct, steel 400 N/mm²||4 x 0,63 mm|
|Smallest radius||40 mm|
|Working speed||5 m/min - 9 m/min|
|Stroke rate at nominal load||3520 1/min|
|Stroke rate during idle run||5500 1/min|
|Starting hole diameter||15 mm|
|Weight (with 4 Ah rechargeable battery)||1.6 kg|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.