Country/region and language selection

TruTool N 700


TruTool N 700

For radial and interior cutouts

Perfect for dismantling work

The extraordinarily compact TruTool N 700 weighing just 7.7 kg provides the highest level of ergonomics and freedom of movement. It is equipped with a powerful 1700-watt drive with high traction. TruTool N 700 cuts flat and doubled sheets as well as bends up to 90° making it the perfect machine for disassembly work. The universal lean handle is suitable for the most diverse operating situations and cutting tasks under restricted space conditions.

Easy to set

The machine can be rotated by 360° in 4 x 90° increments without any obstructions.

Rectangular punch with flexibility for profiles

Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.

Minimal force required

You work without feed force so the required force is reduced to a minimum.

Surprisingly lightweight

Unbeatable weight and power ratio of 7.7 kg versus cutting sheet thicknesses of 7 mm.

Impressive handle

Space-saving operation thanks to the narrow form and positioning of the handle.

Consistently fast

No drop in performance thanks to consistent speed under load.

Nibblers: Video on the area of application
TruTool N 700, dimensional drawing

The handle

The universal handle is excellent for the most diverse applications. Fully positioned at the top of the machine, it eliminates obstructions to a minimum with its extremely slim size, allowing maximum freedom of movement. Ideal for working under restricted space conditions and for processing profiles.

Flat sheet

For cutting straight sheets and trimming them to length. For notches, as well as radial and interior cutouts.

Tanks and containers

Dismantling and disassembly, cuts across edges and weld seams


For cutting profiles, cuts across edges and weld seams, as well as for dismantling tanks and containers.

Coil processing

For cutting coils. For relief cuts and sampling.

The following consumables and the corresponding accessories are included in the scope of delivery.

Tube of grease "G1", 0.88 oz
1 unit 0344696
1 unit 2673274
Die 7 (integrated)
1 unit 1884878
Standard punch (integrated)
1 unit 2260200
Allen key
1 unit 0067857
Setting gauge
1 unit 1411767
1 unit 1763686

Find the right consumables and accessories for your machine here.

Wear plate

Protects the die holder against excessive wear

1 unit  2260202
Set of 5  1264374
Set of 2  1264373
Punch guide

1 unit  2260203
Set of 2  1264366
Die No. 5

For processing aluminum, mild steel, stainless steel 85,000 up to 0.2 in., and stainless steel 114,000 up to 0.1 in.

1 unit  1884879
Set of 2  1264173
Die No. 7

For processing aluminum and mild steel from 0.2 - 0.27 in.

Set of 2  1264137
Set of 5  1264139
1 unit  1884878
Punch CR

For processing stainless steel

Set of 5  1264415
Set of 2  1264414
1 unit  2260201
Die P7

Well-suited for the processing of profile sheets, aluminum, and mild steel from 0.2 - 0.27 in.

1 unit  1884877
Set of 2  1264174
Standard punch

For processing aluminum and mild steel

1 unit  2260200
Set of 2  1264117
Set of 5  1264119

1 unit  2673274
Punching and nibbling oil for aluminum

1000 ml  0125874
Punching and nibbling oil for steel

500 ml  0103387

1 unit  1763686
Roller holder

Special for coil applications. Ideal for cutting in reverse.

1 unit  1284047
Chip bag

To collect chips

1 unit  0109275
TruTool N 700
Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² 7 mm
Maximum sheet thickness, steel 600 N/mm² 5 mm
Maximum sheet thickness, steel 800 N/mm² 3.5 mm
Maximum sheet thickness, aluminium up to 250 N/mm² 10 mm
Smallest radius 140 mm
Working speed (max.) 1.3 m/min
Starting hole diameter 50 mm
Nominal power consumption 1700 W
Length 426 mm
Height 302 mm
Weight 7.7 kg

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

TRUMPF products in the construction industry
Construction industry

Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

TRUMPF products in mechanical engineering and system construction
Mechanical engineering and system construction

Whether it's sheet metal design, repair work, or dismantling work, TRUMPF's machines and tools are used throughout the life cycle of machinery and systems.


To cut sheet metal, we can offer you sheet metal cutters, slitting shears, and nibblers. Find out more about the benefits to you here.

Power Tools Sales
Fax +41 58 257 64 01
5-year guarantee Find out more Operator's manuals Find out more Servicing and repairs Find out more Genuine parts Find out more
Service & contact